In the following, assume the CD-ROM drive is mounted as D. Change to the location where you extracted SYSLINUX, and run it:Ĭreate a new file E:\SYSLINUX.CFG as follows:Ĭopy the boot files from the FreeDOS "full" CD-ROM image (fdfullcd.iso) to your USB stick. Let's say you put it in C:\syslinux, and your USB stick is E. To do so, simply download and extract the archive. To fix, you will need to run mklabel to change the label to msdos, then make a partition. If you see an error message like Partition Table: loop then be careful since it doesn't support the "bootable" flag. Information: Don't forget to update /etc/fstab, if ~]# parted /dev/sdb mkpart primary fat16 0 ~]# parted /dev/sdb toggle 1 bootĭepending on the size of your USB stick, you may need to replace fat16 by fat32, to use larger partition sizes. Number Start End Size Type File system Flags Sector size (logical/physical): 512B/512B Information: Don't forget to update /etc/fstab, if ~]# parted /dev/sdb print Warning: The existing disk label on /dev/sdb will be destroyed and all data on You can use parted to prepare the boot disk on this ~]# parted /dev/sdb mklabel msdos ![]() ![]() Linux uses the /dev meta-filesystem to list devices, so the USB disk may be something like /dev/sdb. Then enter the following diskpart commands: The Windows Preinstallation Environment (WinPE) 2.x should also work, for those that need it. All operations must be performed as Administrator (right click, Run as Administrator) using Windows Vista, or Windows Server 2008. If using Windows, your USB stick is mounted as something like E.
0 Comments
Leave a Reply. |